Equipment specifications

Common specification

Controller

32 bits ARM MCU 96MHz Clock, 256KB flash, 96KB SRAM, USB2.0

Interface to the host

USB Type-C connector × 1(Communication with measurement terminal and power supply)

Power supply

DC5V(Allowable range 4.5 to 5.25V) Up to 4 units can be operated by supplying 500mA from USB connector

Power consumption

AI / DI: 0.6 W or less(5V 120mA)
DO : 0.5 W or less(5V 100mA)

Connection terminal

6 poles × 4(Communication and Power Supply between units)

Consolidated units

6 units(Separate power source required from 5th unit)

Connection method

Connecting the main unit using the right and left connecting terminals, or connecting the main unit using a dedicated cable

I/O terminals

32 poles (see model-specific specifications for terminal allocation)
Screw size: M3 (recommended tightening torque: 0.5N・m)
Terminal pitch: 7.62mm, crimp terminal width is less than 6.4mm
spec-fb.svg

External dimensions (mm)

W150 × H60 × D32
(Excluding the protrusion of the mounting-hole ear and connecting)

Mass

Approx. 170 g

Material

Body: Polycarbonate + ABS resin
Terminal block cover/Light guide rod: Polycarbonate

Degree of protection

IP20 equivalent

Operation Storage Environment

Temperature range:-20 to 60℃ (No condensation)
Humidity range: 10 to 90% RH (No condensation)

Conforming standard

RoHS2

Insulation performance (Insulation method)

Isolate the photocoupler between the I/O terminals and the control circuit (Not isolated between the I/O terminals) Isolated DC/DC is applied to the power supply

PW LED(Yellow green)

Display the status by lighting or blinking (Control by controller)

Status display LED

DI:16 pieces in red (Corresponding LED lights when digital input signal is ON)
DO:16 pieces in red (Corresponding LED lights when digital output signal is ON)
AI:8 pieces in RGB (Corresponding LED lights up when a signal within the measuring range is received)

Installation method

Screw-in or DIN-rail mounting using OMRON's Y92F-90

Operation Check Environment

※No inspection or operation check has been performed under other environments.
FLIPLINK
OS : Windows 10

User Tools
OS : Windows 10
PC : Amount of CPU/ memory/ HDD that the above OS operates comfortably

FLIPLINK MONITOR
FLIPLINK Number of connectable units : 4 units
OS : Windows11 Pro 64 bits
PC : Amount of CPU/ memory/ HDD that the above OS operates comfortably
Screen resolution : 1920×1080pixel or 1280×1024pixel
Appearance and Part Names
Specifications by type

Digital input(DI) FLIP-DI16A

Input signal
Non-voltage digital input
Internal power supply : DC3.75V、3mA
ON current
3mA or more
OFF current
0.3 mA or less
Number of input channels
16ch Not isolated between channels,negative common
Internal circuit withstand voltage value
5.5V
Power consumption
0.6W or less(5V 120mA)
Input terminal specifications
16ch × 2 poles each
【Pulse】
ON time  10ms or more
OFF time  10ms or more
Input Frequency  50Hz or less
Maximum pulse count  9,999,999
(Pulse values are initialized by power off or reset.)
※Please be careful not to cause chattering in pulse input to avoid false detection.

Digital output(DO) FLIP-DO16A

Output signal
Open drain non-voltage digital output
Output ratings
DC 30V total 1.3W(max/25℃)
(e.g.)24V 0.05A or less/12V 0.1A or less/5V 0.26A or less
ON resistance
29mΩ or less
Number of output channels
16ch Not isolated between channels,negative common
Power consumption
0.5W or less(5V 100mA)
Output terminal specifications
16ch × 2 poles each

Analog input(AI) FLIP-AI08A

Input signal
Direct current DC4~20mA input resistance approx 240Ω
DC voltage DC1 to 5V Input impedance 1MΩ or more
Number of input channels
8ch(Non-isolated, current and voltage between each channel are switched mode by software)
AD converter
12bit
Input accuracy
±0.2%fs or less
※fs represents full scale, each value indicates the error at the maximum range
Temperature coefficient
±0.005%/℃
※For input accuracy with 25℃ as standard,an error equivalent to the input accuracy is added for a temperature change of 1℃
Power consumption
0.6W or less(5V 120mA)
Input terminal specifications
8ch × 2 poles each (16 poles are NC)
Contact Us
contact-01.webp
logo2.svg
X icon
Facebook icon
Instagram icon
YouTube icon